ADA Compliant Grab Bars
grab bars are fabricated from 1.5 inch diameter stainless steel tubing with a satin finish. The round snap-on flange utilizes a concealed mounting system that consists of a 14 gauge 304 series stainless steel mounting flange with two vertically aligned mounting holes and a 22 gauge snap-on 304 series stainless steel cover. The flange is three inches in diameter.
ORDER# 34-1212… $39.95
12-inch Straight, 1.5-inch Diameter Tubing
ORDER# 34-1216… $44.65
16-inch Straight, 1.50-inch Diameter Tubing
ORDER# 34-1218… $46.09
18-inch Straight, 1.5-inch Diameter Tubing
Order# 34-1224… $51.70
24-inch Straight, 1.5-inch Diameter Tubing
Order# 34-1232… $56.68
32-inch Straight, 1.5-inch Diameter Tubing
ORDER# 34-1236… $61.85
36-inch Straight, 1.5-inch Diameter Tubing
ORDER# 34-1242… $67.00
42-inch Straight, 1.5-inch Diameter Tubing
ORDER# 34-1248… $69.97
48-inch Straight, 1.5-inch Diameter Tubing
ORDER# 34-1804… $149.00
Wall to Floor Grab bar with Slip Outrigger – 30 x 33 inches.
This wall to floor grab bar extends 30″ out from the wall, bends 90 degrees and is 33″ off the floor. The slip outrigger adds additional support and swings 360 degrees around the bar. All dimensions are centerline dimensions. The bar is fabricated from 1.5″ OD stainless steel tubing and has a #4 satin finish.
ORDER# 34-1803… $90.00
Wall to Floor Grab Bar – 30″(H) by 33″(V) with Loose Flange, 6″ Floor Stub.
Wall to Floor Grab bar with round concealed flanges and 1.5″ diameter stainless steel tubing. Centerline dimensions are 30 inches horizontally out from the wall, and 33 inches vertically down to the floor.
ORDER# 34-1806… $98.92
LEFT – L shape, 1.5OD, Left Hand. (Shown)
This left hand L-shaped grab bar is fabricated with Type 304 series stainless steel, and utilizes a round, concealed flange for mounting. The tubing has an outside diameter of 1.5 inches. The grab bar is 32 inches high by 16 inches wide from center-line to center-line. All grab bars should be professionally mounted using a mounting kit.
ORDER# 34-1805… $98.92
RIGHT – L Shape, Same Specs.
ORDER# 34-1801… $99.00
This shower grab bar can be used in a right hand or left hand configuration and is fabricated with 1.5 inch O.D. type 304 series stainless steel, and utilizes a round, concealed flange for mounting. The grab bar is 36 by 24-inches from centerline to centerline. All grab bars should be professionally mounted using a mounting kit.